5
© 08/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone +49 221. 70 913-0 | Fax +49 221. 70 913-32 | [email protected] | www.rtw.com
Operation
If these preconditions are given and the TM-RAV is connected to the Ravenna network, you can start creating presets, defi ne
audio groups and assign input signals.
NOTE -
In each new created audio group of a preset, always the fi rst Ravenna input signals in the order will be assig-
ned to the channels for display. Therefore, please always verify the input routing and adjust the assignment if necessary.
Proceed as follows:
10. As described in the operating manual, open the menu system on your TouchMonitor and create a new preset.
Further information on how to create and manage presets can be found in the operating manual of your device.
11. Create a new
Audio Group
and defi ne the operation mode (e. g. 5.1).
AoIP-Ravenna
is set as
Domain
, this cannot be
changed. Touch
Confi gure
in the
Input Routing
section to perform the input routing.
11.