© 06/2019 | Technical changes without notice | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Fon +49 221. 70 913-0 | Fax +49 221. 70 913-32 | [email protected] | www.rtw.com
4
Operation (continued)
3. One by one touch the buttons in the
Input
column and select the corresponding Dante signals, which should be displayed
on these input channels.
NOTE -
The channel designations
01
,
02
, ...,
32
shown in this documentation correspond to the initial designations
in the Dante network. When these channel designations are renamed by the network administrator, the changed channel
names will also appear in the routing of the TouchMonitor.
In the following fi rst example we assumed that the fi rst six Dante channels can be assigned to a 5.1 Surround display.
3.
