Page 13
Ⅴ
. OPERATION
Sports wheelchair installation steps
INSTALL:
Step 1 :
The” connecting component” is arranged on both sides of the wheel chair frame and fixed. Connect
the wheelchair and the connecting components of the attachment and turn the handles of left and right
component to tighten them.
Step 2 :
Loosen the orange safety pin and lift the handlebar to the desired height.
Step 3:
Obligatory: tighten the orange safety pin, or serious danger can occur.
Step 4:
Lift the supporting leg and stuck the lever on the side, so that you fix the position of the supporting leg.
Step 5:
Press the button to unlock the handlebar.
Step 6:
Press on/off button.
UNINSTALL:
Step 1:
Release the supporting leg.
Step 2:
Press the button on the side next to the battery to lock the handlebar.
Step 3:
Untighten the orange safety pin.
Step 5:
Push the handlebar gently forward.
Step 5:
Lift the tab under the orange safety pin and let down the handlebar, so that the supporting leg reaches
the floor.
Step 6
: Let go of the tab and slightly tighten the orange safety pin. Press on/off button to turn the attachment
off.
Step 7
: Loosen the connecting elements on left and right side to release the wheelchair from the attachment.
WARNING!
Must to tighten the safety nut before running the wheelchair attachment.
WARNING!
Never forget to wear seat belts before running.
WARNING!
Do not take a sudden turn in the case of high speed . This will prevent the wheelchair attachment
overturn .
Safety pin
Handle
of
connecting
component
Tab
Summary of Contents for SPEED3X RS
Page 1: ......
Page 19: ...Page 19 Maintenance book Date km Check up and maintenance ...