RTS DKP-4016, Technical Manual

Page: 220 / 282

220 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
8.
Press the SEL button .
A list of actions for the keypanel action appears in the panel display (see “Panel Swap Key States” on page 219).
9.
Using the arrow buttons,  select the action desired.
10.
Press the SEL button .
An arrow appears next to the selected option.
To configure the panel swap key states , do the following:
1.
Starting at the Key Options|Panel Swap menu, select Key States .
2.
Press the SEL button .
Force Off and Retain appear in the panel display.
3.
Using the arrow buttons,

select the key state you want to enable (see “Panel Swap Key States” on page 219).
4.
Press the SEL button .
An arrow appears next to the selected option.
To erase any programming from the panel swap configuration , do the following:
1.
Starting at the Key Options|Panel Swap menu,

select Control .
2.
Press the SEL button .
GPI Inputs, GPI Outputs, and Keypad appear in the panel display.
3.
Using the arrow buttons,

select the control mechanism you want to erase .
4.
Press the SEL button .
The appropriate sub-control mechanism appears (see “Panel Swap Control Options” on page 218).
5.
Using the arrow buttons,

select the sub-control mechanism you want to erase .
6.
Press the SEL button .
Cycle To, Switch To, Toggle To, and Unassigned appear in the panel display.
7.
Using the arrow buttons,

select Unassigned .
8.
Press the SEL button .
An arrow appears next to the selected option.
Key Options Menu, Solo
Solo allows the user to set up a key that causes all other keys to turn off when activated. However, when the solo key is
released, the keys that were turned off by the solo key turn back on.
You can assign only one (1) solo key.
To create a solo key , do the following:
1.
Starting at the Key Options menu,

select Solo .
2.
Press the SEL button .
Tap Key appears in the panel display.
3.
Tap down on the keypanel key you want to configure as solo.
The selected talk key indicator turns red .
To remove a solo key , do the following:
1.
Starting at the Key Options menu,

select Solo .
2.
Press the SEL button .
Tap Key appears in the panel display.
3.
Tap down on the red solo keypanel key you want to remove the solo assignment.
The selected talk key indicator turns red .