RTS DKP-4016, Technical Manual

Page: 110 / 282

110 Basic Operation DKP-4016
Bosch Security Systems, Inc.
Technical Manual F.01U.308.248 Rev. 03
Key Display Options Group Box
The Key Display Options group box is used to configure the keypanel keys to show key crosspoint gains, show listen
assignments, or show the matrix for each key assignment. For more information on the available options, see “Service Menu,
Key View” on page 228.
NOTE: Not all options are available in 8-character alpha (or Unicode) mode. This is because the alpha takes two rows to
display on the key, and there is insufficient room to show volumes and lstn/mtx assignments.
IMPORTANT: Show Listen and Show Matrix are mutually exclusive options. Only one (1) of these options may be
enabled at a time
To configure the keypanel display , do the following:
1.
Select the Always Show Per-Key Volumes check box if you want to display the crosspoint gain for each key on the
keypanel.
2.
From the Show Listen drop down menu, select Disabled , Enabled , or Enabled-Suppress Auto-Function .
3.
From the Show Matrix drop down menu, select Disabled , Enabled , or Enabled-Suppress Local .
Panel Display Options Group Box
The Panel Display Options group box is used to enable the menu context, display speaker volume and to switch the display to
emulate a KP-32 keypanel. For more information on the available settings, see “Service Menu, Key View” on page 228.
To configure the panel display options , do the following:
1.
Select the Always Show Main Volume check box .
2.
Select the Menu Context check box to display the navigational menu above the keypanel keys.
3.
Select the Emulate KP-32 check box to convert the keypanel display to look like a KP-32 Classic keypanel.
FIGURE 38.
Display Page – Key Display Options Group Box
FIGURE 39.
Display Page – Panel Display Options Group Box