36 Operation
BTR-30N, TR-30N, TR-32N
To
enable or disable the antenna power
, do the following:
1.
From the status screen, press
MENU
.
2.
Using the UP/DOWN arrow buttons, select
Base Main
.
3.
Press
SET
.
4.
Using the UP/DOWN arrow buttons, select
MORE...
.
5.
Press the
DOWN arrow button
.
The stage announce level starts flashing.
6.
Press
SET
until Antenna Power flashes.
7.
Using the UP/DOWN arrows, adjust
the setting
.
8.
When finished, press
SET
.
9.
Step through the other settings in the screen by pressing
SET
.
After the last option on the screen, the base main selection
menu appears.
10.
Press
MENU
twice to go back to the status screen.
NOTE:
The base defaults back to the status screen if no
action is taken after five (5) minutes.
CAN Bus Number
The
CAN Bus Number
for a base station must be set only in
multiple base station configuration and only if the operator
wishes to have the following features shared among multiple
base stations:
•
First-On-Latch – Out of receiver channels (Push to transmit)
•
Automatic beltpack TX power control
•
Automatic beltpack user ID assignment
•
Beltpack TX and Talk shutdown via the base front panel
FIGURE 48.
Base Number
Table 1 lists valid base number settings. Please see “Connection
of Multiple Base Stations with the Link Cables” on page 40.
To
set the CAN bus number
, do the following:
1.
From the status screen press
MENU
.
2.
Using the UP/DOWN arrow buttons select
More...
3.
Press the
DOWN arrow button
.
4.
Press
SET
until the Base Number option flashes.
5.
Using the UP/DOWN arrow buttons, set
the number
.
6.
When finished, press
SET
.
7.
Step through the other settings in the screen by pressing
SET
.
After the last option on the screen, the base main selection
menu appears.
8.
Press
MENU
twice to go back to the status screen.
NOTE:
The base defaults back to the status screen if no
action is taken after five (5) minutes.
Intercom Settings
There are multiple parameters to set in the Intercom Setting
menu:
•
2-wire intercom type: Telex, RTS, Clear-Com, Off
•
Only intercom 1 active, only intercom 2 active, both
•
2-wire intercom input/output levels
•
4-wire intercom on/off
•
4-wire intercom input/output levels
TABLE 1.
Valid Base Number Settings
Base Number
Function
01
Master
02
Servant
03
Servant
04
Servant
05
Servant
06
Servant
07
Servant
08
Servant
09
Unassigned (Default)
