RTS Altus, Manual, Page: 7 / 15

RTS Motors
"My" position programming
24
3
The product must be stationary,
but can be at any position.
Press briefly the Stop button
to initiate the intermediate or
‘my’ position. The product will
automatically move to the IP or
‘my’ position and stop.
Using the Intermediate Position
1
Use the Up or Down button to
move the product towards the
desired intermediate position.
Stop the product at the
desired intermediate position.
Press and hold the Stop button
until the product jiggles.
Setting an Intermediate Position
Press
for 5
secs
"MY" position set
Press
for 1
secs
If an Intermediate Position has been set and the awning is controlled by a Somfy RTS sun sensor,
then the awning will only extend to the IP. Remove the IP function if the end user wants the
awning to fully extend when the sun sensor is activated.
IP = IP =
2
Send the product to the intermediate
position by pressing the Stop button
Deleting an Intermediate Position
When the product has reached the intermediate position and
stopped, press and hold the Stop button until there is a jiggle.
Press
for 5
secs
Press
for 1
secs
"MY" position deleted
Note: the following procedure will only work after programming has been completed.