RTS ACS-101, Instruction Sheet

Page: 3 / 8

Instruction Sheet
Bosch Security Systems, Inc.
Installation Sheet F.01U.XXX.XXX Rev. 0X
5
FIGURE 5.
ACS-101 Rear View
2.
DC Outlet Fuses 5Amp, SlowBlow, 250VDC. Size 3AG
3.
IEC Power Inlet with Fuse IEC-320 power inlet with a 10Amp, 250VDC Fuse. Size is 5mm by 20mm.
4.
DC Power Output Jacks Threaded 5.5mm x 2.1mm Jacks. 12 VDC up to 5Amps is available at each jack.
5.
Receive Antenna Jack This TNC female connector is where the recive antenna connects.
6.
Receive Splitter Jacks These 10 TNC female connectors are the outputs for the receive signals.
NOTE: All unused jacks should be terminated with 50 Ohm loads. See
Accessories on page X.
7.
Transmit Combiner Jacks These 10 TNC female connectors are the inputs for the transmitters.
8.
Transmit Antenna Jack This TNC female connector is where the transmit antenna connects.
TRANSMIT
ANTENNA
FUSE
5A SLOW BLOW
DC OUT
12V 5A
FUSE
5A SLOW BLOW
DC OUT
12V 5A
RECEIVE
ANTENNA
TRANSMIT
RECEIVE
8
2
4
3
5
2
4
7
6