background image

Instruction Sheet

Bosch Security Systems, Inc.

Installation Sheet

 F.01U.XXX.XXX Rev. 0X

ACS-101

Amplified Broadband UHF Combiner-Splitter

General Description

The ACS-101 (Antenna Combiner Splitter 10 to 1) is an 
amplified and filtered broadband splitter-combiner. It allows up 
to 10 base stations to use only one (1) transmit and one(1) 
receive antenna.

The antenna combiner section contains innovative hybrid 
coupling, amplifying and matching technology to combine 10 
transmitters to one (1) output with very low intermod distortion.

The antenna splitter section has broadband input filtering and 
amplification to maintain signal levels through the splitters. 
High output isolation between pots is also achieved. 

The industrial strength power supply of the ACS-101 supplies 
voltage and current to two (2) outputs on the product. Each 
output can supply up to 5Amps at 12VDC.

IMPORTANT:

Using products that deliver more than 

50mW of transmit power to the ACS-101 
is not recommended, and may cause 
damage to the unit or accompanying gear.

Specifications

Overall

Antenna Connectors....................................................................................................................................Standard TNC Receptacles
AC Input Power .....................................................................................................................................100–120VAC, 60Hz, 6A max.
AC Input Fuse ............................................................................................................................................................. 10A, 250V, 3AG
DC Output Power...................................................................................................................................... 12VDC, 5A for each output
DC Output Jacks .......................................................................................................................................Two, 5.5mm x 2.1mm Jacks
DC Output Fuses............................................................................................................................................ 5A, 250V, 5mm x 20mm
Size..................................................................................................... 3.50” (88.9mm) H x 16.75” (426mm) W x 14.63” (372mm) D
Weight ...................................................................................................................................................................10lbs., 4oz. (4.65kg)

Antenna Splitter

Frequency Range..............................................................................................................................................................614–746MHz
Output IP3 ................................................................................................................................................................ Greater than 30dB
Net Gain ............................................................................................................................................................................. 0dB, typical
Noise Figure.................................................................................................................................................................. less than 4.5dB
Minimum Isolation....................................................... 20dB between adjacent ports; greater than 20dB between non-adjacent ports

Antenna Combiner

Frequency Range..............................................................................................................................................................470–608MHz
Net Gain ................................................................................................................................................................................. 0dB max.
Noise Figure...................................................................................................................................................................... 10dB typical
Output IP3 ......................................................................................................................-55dBc @ +17dBm input on each transmitter

Summary of Contents for ACS-101









Reviews: