FAMILIARIZE YOURSELF
Have a look at the photo of the finished product.
Now have a look at this diagram where all the laser cut parts are showed and
numbered from
A
to
J
and try to identify which is which and where they fit in.
You will notice that the two side walls are double skinned to give a brick finish on
both sides. The ones with the lugs (
B1
&
B2
) are the inside skin and must therefore
face inwards. The outer skins are
J1
&
J2
, facing outwards. The rear wall (
E
) has a
brick pattern on one side only. Depending on the finishing you have in mind and the
position on your track you can choose which way you want the brick rendering to
face.
You will notice that the mezzanine floor (
D
) has a wood finish which should face
upwards.
The roof (
F
) is grooved to give a corrugated finish and the grooving must face
upwards.
Pieces
A
,
C
,
G
and
H
can be mirrored horizontally but not vertically.
