2
Проверил: Р.Ч./24.03.2015г
INSTRUCTION MANUAL
TOOL’S UNITS
1.
SPEED ADJUSTMENT ROLL
2.
TRIGGER LOCK BUTTON
3.
ON/OFF TRIGGER
4.
AIR VACUUMING PLACE
5.
AIR BLOWING PIPE
TECHNICAL DATA
(RTM301)
VOLTAGE
230V-50HZ
POWER
600W
SPEED
0-11000r/min
USING AREAS
This machine has been designed for cleaning machines and industrial tools.
SAFETY INSTRUCTIONS
Read all instructions failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
1.
The voltage of the power source must agree with the value given on
the nameplate of the machine.
2.
Before using the tool, check the tool and it’s power connections if there is any
damagement.
3.
Don’t connect the plug to power source when switch is on.
4.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
5.
Extreme temperature differences cause water droplets on power conducting parts .
Before switch on the tool, wait tool to get same temperature working room
temperature.
6.
Use the power tool, accessories and tool bits etc. in accordance with these instructions
and in the manner intended fort he particular type of power tool, taking into acccount
the work conditions and the work to be performed. Use of the power tool for
operations different from intended could result in a hazardous situation.
