Проверил: Р.Ч./24.03.2015г
- 7 -
Original Instructions for Use of Circular Saw
GATALOGUE № RTM 384
TECHNICAL DATA:
Power supply
230V-50HZ
Power Output
1300W
Diameter of cutting blades 185*20MM
Speed
4500 r/min
Maximum cutting depth
-
90º: 65mm
-
45º: 44mm
PARTS
7.
ON/OFF BUTTON
8.
HANDLE
9.
DEVICE FOR MEASURING THE ANGLE
10.
DEVICE FOR DETERMINATION OF THE CUTTING
ANGLE
11.
CUTTING BLADE PROTECTOR
12.
BUTTON "LASER", LASER ON/OFF
Safety instructions – general information:
Very careful read following instructions. Any defect can cause electric shock.
2.
Workplace
- Observe ventilation openings to be always clean and unblocked. The most
efficient method for cleaning them is with a stream of condensed air.
When you do this you must use safety glasses and mask. Do not attempt to
clean ventilation openings by sticking sharp objects into them.
- Some chemicals such as petrol, solvents, detergents with chlorine and
ammonia can damage plastic parts of
the circular saw.
2
5
