RTRMAX RTH113, Instruction Manual

Page: 4 / 19

Проверил: Р.Ч./24.03.2015г

Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventative safety measures reduce the risk of
starting the power tools accidentally.

Never use the cord for carrying, pulling or unplugging the power tool.

Don’t switch off the tool when it is on load.

Keep work area clean and well lit. Cluttered and dark areas invite accidents.

Avoid the anormal body moving, when operating the tools.

Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carry power tools with your finger on the switch or plugging in power tools that have the
switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
SIDE HANDLE / ADJUSTMENT DEPTH STOP
Use the side handle, during drill.
Desired hole depth can be adjust by adjustment depth stop. For adjusting, loose the screw of side
handle and adjust depth and tighten the screw again.
CHUCK
This tool provides fast bit changing without using chuck key.
SCREWING BITS
Always use the bits adapter , when operate with screwer bits. For screwing, rotate the torque
control to drill bit symbol.
OPERATING
Always use the correct supply voltage.
The voltage of the power source must agree with the value given on the nameplate of the
machine. Machines designated for 230V can also be operated with 220V.
SWITCH ON/OFF
Switching on: Press the on- off switch
Switching off: Release the on- off switch .