RTRMAX 0503SA0115, Original Instruction Manual

Page: 4 / 11

Проверил: Р.Ч./24.03.2015г
• Fix the sand-paper as tight as possible.
Before assembly sanding paper always remove the plug from the mains.
DUST COLLECTION FEATURE
For a better dust extraction of the working surface your sanding machine can be connected
to the ordinary vacuum cleaner for house-use. You can use the adaptor (see figure). The
adaptor has to be installed on the back side of the machine, in the opening.
OPERATION

Push in the pull switch to make your sanding machine work.

If you want to disconnect the machine, you have to let loose the same pull switch. The
pull switch can be blocked can be blocked in position "ON" by pushing in the switch
on the side, while you keep pushed in the pull switch. machine can be disconnected by
briefly pushing in the pull switch.
APPLICATIONS
1. Sanding wooden surfaces
2. Removing rust and sanding metal surfaces.
3. Polishing.
GRIPS
The use of your sanding machine is made easier because of the two grips one on the front
side and one on the back side. Through that you can hold the machine with two hands, so
that you have .a: better control of the machine and besides you do not risk becoming in
touch with the moving parts. Hold your sanding "machine always with your both hands.
TROUBLESHOOTING
In case the sanding machine does not work well, we you some possible causes and
solutions.
1. The electric motor gets hot.
The cool ventilation slots in the motor are stopped with dirt
- clean the cool ventilation slots
The motor is defect.