Updating a Motor
1. Run the RTFW Program.
2. Make sure the Receiver is not powered and that no motors are attached.
3. Connect the USB cable from the Receiver to your computer. The Receiver should power up.
4. The program will now detect and connect to the Receiver. You should see, “Connected to
Device” in the program.
5. Attach 12-17V power to the Receiver.
6. In the “Which Device to Update” section, select Motor from the drop down menu.
7. In the “Firmware” section, if you are presented with a choice, select the firmware you would
like to flash onto the device. NOTE: we always advise you choose the highest (non-Beta)
version.
8. Click the “Update Device” button.
9. Attach ONE motor to the Receiver. The update process should begin automatically once the
motor is detected.
10. When the motor begins moving, detach it from the Receiver. The process is complete.
11. If you need to update another motor, go to step 8.
Note: You can only update one motor at a time. Do not attach more than one motor or the update will fail.
Summary of Contents for LATITUDE MDR
Page 7: ...Usage Chart MK3 1...