background image

INM RTK RT-AD rev 4

1

1. 

INTRODUCTION 

1.1  General 

The RT-A/D range of power supplies provides a single enclosure containing 2 x independent power 
supplies each complete with a power-on LED and a supply monitor relay with change over contact 
for use with 3rd party devices. 

The DC output of each power supply is combined using “OR” diodes to ensure the output remains 
available if either the Supply 1 or Supply 2 is available. 

The redundant power supply is available in a range of wattages, (25, 40, 60, 100, 150, 200, 320 
watts), using combinations of AC/DC and DC/DC switched mode power supplies as required for 
each application.

1.2  Model Code Definition

RT-AD-AB-PWR-24

Where:

RT-AD

Model range

A

Power supply 1 input range (L, M or H)

B

Power supply 2 input range (L, M or H)

PWR

Output power in Watts (25, 40, 60, 100, 150, 200 or 320)

24

DC output voltage

Power supply input options are:

48V DC nominal (32-72V DC)

110V DC nominal (72-144V DC) 

88-264V AC 47-63Hz (120-270V DC) 

1.3  Available Models

Only those combinations listed in the table below are available.

Model

Input Range Supply 1

Input Range Supply 2

RT-AD-LH-25-24

36-72VDC

88-264VAC or 125-270V DC

RT-AD-MH-25-24

72-144VDC

88-264VAC or 125-270V DC

RT-AD-HH-25-24

88-264VAC or 125-270V DC

88-264VAC or 125-270V DC

RT-AD-LH-40-24

36-72VDC

88-264VAC or 125-270V DC

RT-AD-MH-40-24

72-144VDC

88-264VAC or 125-270V DC

RT-AD-HH-40-24

88-264VAC or 125-270V DC

88-264VAC or 125-270V DC

RT-AD-LH-60-24

36-72VDC

88-264VAC or 125-270V DC

RT-AD-MH-60-24

72-144VDC

88-264VAC or 125-270V DC

RT-AD-HH-60-24

88-264VAC or 125-270V DC

88-264VAC or 125-270V DC

RT-AD-LL-100-24

36-72VDC

36-72VDC

RT-AD-LH-100-24

36-72VDC

88-264VAC or 125-270V DC

RT-AD-MM-100-24

72-144VDC

72-144VDC

RT-AD-MH-100-24

72-144VDC

88-264VAC or 125-270V DC

RT-AD-HH-100-24

88-264VAC or 125-270V DC

88-264VAC or 125-270V DC

RT-AD-LH-150-24

36-72VDC

88-264VAC or 125-270V DC

RT-AD-MM-150-24

72-144VDC

72-144VDC

RT-AD-MH-150-24

72-144VDC

88-264VAC or 125-270V DC

RT-AD-HH-150-24

88-264VAC or 125-270V DC

88-264VAC or 125-270V DC

continued on next page

Summary of Contents for CROUSE-HINDS RT-AD Series

















Reviews: