9
Auto Track
Command:
fix03password
Reply:
Reports the Geo-info 5 times at 30s intervals. (s:second, m:minute, h:hour).
Note:
To report continuously at 30s intervals, replace 005 with *** wildcard.
Interval must not be less than 20s
Cancel Auto Track
Command:
nofix+password”
Reply:
(Tracker will stop reporting)
Get Location in Absolute Street Address
You must set up the APN of your local GSM network for the SIM card in the
RTITraq
before
using this function. If there is a user name and password established for GPRS login, please
refer to 5.27 and 5.28 to configure the APN, user name and password for GPRS login.
Command:
password
Reply:
(real street address and name)
Example:
123 Main Street, Anytown U.S.A. 00000
Location-Based Service (LBS)
When the
RTITraq
can't receive valid GPS signals, it will report positions by location-based
service(LBS). The messages include the GPS coordinates of the last position in SMS mode, but
the LAC (Location Area Code) in the message will be the current new position. The location can
be seen by inputting the LAC code in the menu “Manual Track” of the web platform
www.gpstrackerxy.com
. You can also send the command “password” to tracker to get
the newest absolute address and GPS coordinates as well.
RTITraq
will automatically switch to
track by location- based service in GPRS mode, and displayed on the map of web server with
LBS mark. There may be some discrepencies with actual location by LBS tracking; the precision
depends on GSM reception.
Note
: This feature can be used normally in most areas, depending
on the signal strength of your GSM network. It may not be available in all areas.
