Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
Manual for RTSO-9003U-V2.0
10
3 Installation and use
3.1 picture of products
3.2 usage
a) Make sure the external system is powered off
b) Install the TX2 core module to the U1 connector
,
Please pay attention to the alignment between
connectors during installation
,
Force uniformity
,
apply uniform force, and install the fixing screw
at the same time.
c) Install necessary external cables.(e.g., the display cable to the HDMI monitor, the power input cable
to power the system, the USB cable to connect the keyboard and mouse...).
d) Connect the power cord to the power supply.
e) RTSO-9003U adopts automatic power on design. Turn on the power and the system starts to work.
f) For systems without protective enclosure, please avoid moving the whole system after the system is
powered on. It is strictly prohibited to touch the circuit board and its electronic components.
3.3 Recovery MODE
Jetson TX2 core module can work in normal mode and Recovery mode,
In the Recovery mode,
file system
update, kernel update, boot loader update, BCT update and other operations can be performed.
Procedure to place system in Force USB Recovery Mode:
a) Power down the device.
b) Use USB cable to connect otg-usb port (P4) of RTSO -9003U with Jetson to develop host USB port
c) With the system powered on:
Press and hold the RECOVERY FORCE button.
While depressing the RECOVERY FORCE button, press and release the RESET button.
Wait 3 seconds and release the RECOVERY FORCE button.
d) The system enters recovery mode, and subsequent operations can be performed at this time.