Touchscreen Control Panel
It’s Under Control
®
FRONT PANEL DESCRIPTION
Installation & Operation
HDCP
LINK
TX
1 2 3
No.
Name
Function
1
LINK LED Indicator
Turns blue when the transmitter and the receiver are connected successfully.
2
HDCP LED Indicator
•
Turns blue when the HDMI signal is transmitted with HDCP.
•
Blinks blue when the HDMI signal is transmitted without HDCP.
•
Turns off when there is no HDMI signal (no picture).
3
Power LED Indicator
Turns red when power on.
REAR PANEL DESCRIPTION
RX
TX
RS232
HDMI IN
HDBT OUT
ETHERNET
ETHERNET
DC 24V
1
4
2 3
5
6
7
No.
Name
Function
1
RS-232
3-pole captive screw connector for RS-232 pass-through control.
It can be connected with control system (Use a 3-pole captive to 9 pin female D connector), or
connected with the device which needs to be controlled.
2
IR IN
3.5mm jack for connection to a control system IR output or IR receiver to collect IR signal.
Works with VTX-R IR OUT
3
IR OUT
3.5mm jack for connection to an IR emitter for control of external device. Works with VTX-R IR
IN port.
4
HDMI IN
Type A female HDMI input port to connect HDMI source device.
5
HDBT OUT
RJ45 HDBaseT output port to connect to the HDBaseT input port of the receiver by CAT5e/
CAT6a cable.
6
ETHERNET
Two RJ45 ports, work as Ethernet Switch together with the Ethernet ports of transmitter or ma-
trix. Connect any one port with a router, the others are able to access LAN.
7
DC 24V
Power port to connect the 24V DC power adapter.
CONNECTION DIAGRAM
VTX-T Transmitter
VTX-R Receiver
RX
TX
RX
TX
4K 70m
1080P 100m
Laptop
IR Receiver
Remote
Projector
IR Emitter
Router
Laptop
HDMI:
RS232:
IR:
HDBaseT:
Internet:
INSTALLATION
Please visit the RTI dealer portal (www.rticorp.com/dealer) for additional instructions and specifications.
NOTE: Features and specifications subject to change without notice.
