MOUNTING
The VHT-1 can be located on a secure, flat surface or mounted horizontally or vertically using the two
mounting wings.
POWERING THE VHR-T
AC Adapter:
Connect an AC adapter (24VDC/1.25A) (included) to the VHT-1 power jack.
HDBASET CABLE REQUIREMENTS:
The VHT-1 transmits HDMI video, IR/RS-232 control signals and power over a Cat5e/6 cable wired to a
VHR-1 HDBaseT Receiver.
Extends HDMI 1080p video up to 230ft (70m).
Extends HDMI 4Kx2K video up to 115ft (35m).
HDMI VIDEO
Connect an HDMI cable to the HDMI IN from a video source (ex. DVD player or Satelite Receiver)
CONTROL INPUTS
The VHT-1 is an expansion device for an RTI control system and is capable of transmitting IR and RS-232
to controlled devices via an VHR-1 Receiver.
RS-232 - Serial:
The RS-232 signal delivered by an RTI XP control processor is wired to the RS-232
DB9 jack and transmitted to the VHR-1 via Cat5e/6. (Supported baud rates: 2400bps - 195200bps).
IR IN - Infrared:
IR signal delivered by an RTI control processor is wired to the IR IN port and
transmitted via the VHR-1.
Installation & Operation
It’s Under Control
®
Product Contents
Contents within the box include the following items:
One (1) VHT-1 HDBaseT Transmitter
One (1) 24VDC/1.25A Power supply
Two (2) Mounting wings with screws (4)
Four (4) Plastic feet
One (1) Operation guide
VHT-1
HDBaseT Transmitter
VHR-1 REFERENCE
SAT
DVD
Projector
Power
RTI Processor
VHR-1
VHT-1
125
[4.921]
12
[.472]
137
[5.394]
110
[4.331]
30
[1.181]
1,5
[.059]
77
[3.031]
47
[1.850]
15
[.591]
REMOTE TECHNOLOGIES INC.
SHAKOPEE, MN 55379
VHT Dimensions
1
137
[5.394]
110
[4.331]
30
[1.181]
1,5
[.059]
77
[3.031]
125
[125]
12
[12]
15
[15]
47
[47]
REMOTE TECHNOLOGIES INC.
SHAKOPEE, MN 55379
VHT Dimensions
VHT-1 TO VHR-1 CONNECTION DIAGRAM
DESCRIPTIONS
1) IR: IR reciever - May be used to receive IR signals to be delivered via the IR OUT output
2) ON: Status indicator - Blinks green when the device is functioning normally.
2) LINK: HDBaseT link status indicator - Illuminates green when the connection is successful.
3) IN: HDCP compliance indicator - Illuminates green when the connected device supports HDCP and is
working normally; blinks green when the connected device does not support HDCP.
4) POWER LED: Illuminates red when powered on.
5) HDBT OUT: Connect to the HDBT IN port of a VHR-1 with a CAT5e/6 cable.
6) HDMI IN: Connect to HDMI source device.
7) IR IN: Connect to a control processor IR output for control of devices via a VHR-1.
8) RS-232: Connect to a control processor for RS-232 control of devices via the VHR-1.
10) 24VDC: Connect with a 24VDC/1.25A power supply.
2
3
4
6
7
8
9
10
5
