It’s Under Control
®
Installation & Operation
VDX-14x
1x4 HDBaseT Splitter
VDX-14x DESCRIPTION
A
B
C
D
E
No.
Name
Function
A
Power
Connect the power supply (Included)
B
Ethernet
Connect a standard Ethernet cable from your router or network switch.
NOTE: Cross over cables are not supported
C
HDMI Input
Connect your source device into the HDMI input port using a
High Speed HDMI cable (not supplied)
D
Infrared Output
IR Emitter is to be plugged into this port
E
HDBaseT Outputs
Display devices are connected via category cable (Cat5e/6/7 )from the
Output port to a VHR-1x receiver (sold separately)
Product Contents
Contents within the box include the following items:
VDX-14x HDBaseT Class B (Lite) Splitter
Power Supply (48VDC)
Rack Mounting Kit
Reference Guide
Requires VHR-1x Receivers (sold separately)
INITIAL SETUP
•
Connect an HDMI cable between Splitter’s “HDMI Input” and Display Device.
•
Connect a CAT5e/6/7 cable between the HDBaseT outputs and a VHR-1x Receiver (not included) finish the
connection using a HDMI cable between the HDBaseT receiver and Video Source
•
Connect the supplied IR Emitter to the IR Out port of VDX-14x or to RTI control processor, and place the
other end over the source’s IR sensor window (as per above diagram)
•
Plug in power jack to “DC 48VDC” port.
•
Power on power adapter.
VIDEO SOURCE CONTROL
An RTI control system may be used for control of the video source and displays. In addition, IR control
of the video source may be sent to an infrared receiver and passed through the VHR-1x HDBaseT
receiver. This signal will be delivered over the category cable to the VDX-14x. Plug an IR Emitter into
the IR Out port and mount it over the source’s IR window.
SOURCE
INPUT 4
INPUT 3
INPUT 2
INPUT 1
*VHR-1x Receiver (sold separately)
Video Source
Connection Diagram
Control from RTI Control System
or
Infrared via IR receiver and VDX-14x
