RTI TheaterTouch T2, User'S Manual And Programming Manual

Page: 70 / 118

TheaterTouch System Controller
60
HOW TO EDIT THE PROPERTIES OF MULTIPLE BUTTONS
The Edit Button Properties dialog allows you to edit many different attributes of a
button or a group of buttons.
To edit the properties of multiple buttons at once:
1. Select the buttons using the Select Button tool from the Tool Palette .
2. Click the right mouse button on one of the selected buttons, either
touchscreen or keypad buttons and choose Edit Properties .
For an explanation of all the button properties, see the “ How to Edit Button
Properties ” section.
Note:
Not all of the tabs and/or controls will be available simultaneously. Only the
options relevant to the button(s) being edited will be shown.
A note about Multiple Selections
If you have more than one button selected, it is possible that they will initially
have different settings.
The following meanings apply to options with a check box:
All buttons in the selection will retain their original values for the setting.
All buttons in the selection will have the setting set to TRUE
All buttons in the selection will have the setting set to FALSE
If options with numerical fields have different values, they will be left blank.
If you DO NOT enter a number, all the buttons will retain their original
setting. If you DO enter a number, all the buttons will be set to that value.
If options with radio buttons have different settings, NONE of the radio
buttons will have a dot next to them. In that case, each button will retain its
original function. If you do wish to assign the SAME function to EVERY
button, select one of the functions from the dialog.