RTI TheaterTouch T2 User'S Manual And Programming Manual Download Page 62

Page: 62 / 118

TheaterTouch System Controller

HOW TO EDIT BUTTON PROPERTIES

The

Edit Button Properties

dialog allows you to edit many different attributes of a

button or a group of buttons.

To open the

Edit Button Properties

dialog box:

1. Select

the

Edit Button Properties

tool

from the

Tool Palette

2. Click the button you want to edit, either touchscreen or keypad buttons

Note:

Not all of the tabs and/or controls will be available simultaneously. Only the

options relevant to the button being edited will be shown.

GENERAL TAB

The options on the

General

tab are:

Disabled -

Check this box to prevent the button from responding (beeping or

reversing/pushing in) when it is touched.

Note:

Disabled buttons can still have commands, macros and page links. The

disabled property refers only to the appearance of the button, not the
functionality.

Reversed -

Check this box to cause the button to be displayed in a reversed or

pushed-in state when the button is not pushed and the normal state when the
button is pushed. The reversed state is: filled in for Rectangular, Radius, Oblong
and Borderless buttons; and Down for Custom Buttons.

Note:

This property does not apply to 3D buttons.

Summary of Contents for TheaterTouch T2























































































































Search results

Summary of Contents for TheaterTouch T2

Reviews:

Related manuals for TheaterTouch T2

Brands by name

Popular brands

RTI TheaterTouch T2, User'S Manual And Programming Manual

Search results

Summary of Contents for TheaterTouch T2

Reviews:

Related manuals for TheaterTouch T2

Brands by name

Popular brands