Reference Guide
It’s Under Control
®
KX7s
In-Wall Controller
If you are encountering any problems or have a question about your RTI product, please contact RTI Technical
Support for assistance (see the Contacting RTI section of this guide for contact details).
RTI provides technical support by telephone or e-mail. For the highest quality service, please have the following
information ready, or provide it in your e-mail.
• Your Name
• Company Name
• Telephone Number
• E-mail Address
• Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your system, a description of the
problem, and any troubleshooting you have already tried.
Please do not return products to RTI without a return authorization.
Service & Support
For news about the latest updates, new product information, and
new accessories, please visit our web site at
:
www.rticorp.com
For general information, you can contact RTI at:
Remote Technologies Incorporated
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
Fax (952) 253-3131
[email protected]
Contacting RTI
Safety Suggestions
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may cause undesired operation.
Read and Follow Instructions.
Read all safety and operating instructions before operating the unit.
Retain Instructions.
Keep the safety and operating instructions for future reference.
Heed Warnings.
Adhere to all warnings on the unit and in the operating instructions.
Heat.
Keep the unit away from heat sources such as radiators, heat registers, stoves, etc., including amplifiers that produce heat.
Power Sources.
Connect the unit only to a power supply of the type described in the operating instructions, or as marked on the unit.
Power Cord Protection.
Route power supply cords so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to the cord plugs at
power receptacles and at the point at which they exit from the unit.
Water and Moisture.
Do not use the unit near water—for example, near a sink, in a wet basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry.
Do not allow objects to fall or liquids to be spilled into the enclosure through openings.
Servicing.
Do not attempt any service beyond that described in the operating instructions. Refer all other service needs to qualified service personnel.
Damage Requiring Service.
The unit should be serviced by qualified service personnel when:
The power supply cord or the plug has been damaged.
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change in performance.
The unit has been dropped or the enclosure has been damaged.
Limited Warranty
RTI warrants its products for a period of three (3) years (one year for included battery packs); or for a period of time compliant with local laws when applicable from the date of purchase
from RTI or an authorized RTI distributor.
This warranty may be enforced by the original purchaser and subsequent owners during the warranty period, so long as the original dated sales receipt or other proof of warranty coverage is
presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and workmanship in this product. The following are not covered by the warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Remote Technologies Incorporated.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or experience of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or removed.
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI website at: www.rticorp.com/declaration
Copyright © 2020 • Remote Technologies Incorporated • All rights reserved.
70-210220-14 V1.0
The KX7s is designed for sophisticated installations that require a touchpanel with the size and power to take
command of a room’s environmental and media technology. With advanced features like a multi-touch capacitive
touchscreen and direct IR/RS-232 control, the KX7s possesses the style and user-friendliness required to fit any
type of setting.
The KX7s provides superior quality and reliability as well as these features:
• Stylish low-profile faceplate with a gloss finish (standard is white, however other faceplate options are available).
• 800x480 WVGA LCD with integrated multi-touch capacitive touch screen.
• RS-232 port for direct control of devices via RS-232 communication.
• High output IR port for direct control.
• Network connectivity via an integrated 10/100 Base-T Ethernet port.
• Completely customizable and programmable.
• Powered using RTI Control Port or PoE (Power over Ethernet).
• Built-in ambient light and proximity sensors.
• Field upgradable firmware.
• USB and Ethernet programming.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may cause undesired operation.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences nuisibles.
2. Cet appareil doit accepter toute interférence reçue y compris des interférences qui peuvent provoquer un fonctionnement indésirable.
Industry Canada Compliance Statement
