rtd cpuModules CMA24BT User Manual Download Page 2

Page: 2 / 116

ii CMA24BT cpuModule

BDM-610000087 Rev A

CMA24BT cpuModules™ User’s Manual

RTD Document Number: BDM-610000087 Revision A
Copyright © 2009-2020 RTD Embedded Technologies, Inc. All rights reserved.

Trademarks

Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”,

cpuModule, dspFramework, dspModule, expressMate, ExpressPlatform, HiDANplus, “MIL Value for COTS

prices”, multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule,

IDAN, HiDAN, RTD, and the RTD logo are registered trademarks of RTD Embedded Technologies, Inc (formerly

Real Time Devices, Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe

are trademarks of PCI-SIG. PC/104, PC/104-Plus, PCI-104, PCIe/104, PCI/104-Express and 104 are trademarks

of the PC/104 Embedded Consortium. All other trademarks appearing in this document are the property of their

respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this

manual, or other components of the system. The procedure set forth in this manual shall only be performed by

persons qualified to service electronic equipment. Contents and specifications within this manual are given

without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable

for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.

Summary of Contents for cpuModules CMA24BT





















































































































Search results

Summary of Contents for cpuModules CMA24BT

Reviews:

Related manuals for cpuModules CMA24BT

Brands by name

Popular brands

rtd cpuModules CMA24BT, User Manual

Search results

Summary of Contents for cpuModules CMA24BT

Reviews:

Related manuals for cpuModules CMA24BT

Brands by name

Popular brands