rtd cpuModule CME37786HX, User Manual

Page: 61 / 122

CME37786HX RTD Embedded Technologies, Inc.
53
Installing SSD Memory
This section explains how to add SSD devices to the cpuModule. This procedure is only necessary
when you wish to add or change Solid State Disk memory devices
You may wish to install SSD memory to use the cpuModule as a “diskless” stand-alone device.
Refer to Storing Applications On-board on page 92 for more information on various SSD device
types. Solid State Disk memories are placed in SSD socket U16.
The following table lists possible configurations for the SSD socket:
Table 27: SSD Devices
SSD Support
Type Part Operation Capacity Notes
Atmel 5V Flash 29C010A read/write 128KB
29C040A read/write 512KB
BIOS Extension
Devices DiskOnChip
Boot Block
Flash read/write to 1 GB+
NOVRAM DS1645Y read/write 128KB
DS1650Y read/write 512KB
SRAM 128KB read/write 128KB battery backup
512KB read/write 512KB battery backup
12V Flash 28F010 read-only 128KB read-only
28F020 read-only 256KB read-only
AMD 5V Flash 29F010 read-only 128KB read-only
29F040 read-only 512KB read-only
EPROM 27C010 read-only 128KB read-only
27C020 read-only 256KB read-only
27C040 read-only 512KB read-only
27C080 read-only 1MB read-only