rtd cpuModule CMA22M Series, User Manual

Page: 16 / 106

8 CMA22M cpuModule BDM-610000069 Rev A
– Match Mode Interrupt generates an interrupt when input bits match a preset value
– External Strobe Mode latches 8 data inputs and generates and interrupt
– Two Strobes can be configured as readable inputs
•
Advanced Analog I/O (aAIO)
– Eight single-ended or four differential analog inputs
– Up to 100kHz sample rate
– 16-bit resolution
– 0 to +5V, +/-5V, 0 to +10V, and +/-10V input ranges
– Per-channel digital filtering
– Per-channel threshold detection generates an interrupt when signal crosses high or low
threshold.
– Advanced DMA
•
Each channel has it’s own DMA buffer
•
Buffer chaining prevents interrupt latency problems
•
DMA to anywhere in 4GB address space
•
Two USB 2.0 (Universal Serial Bus) Ports
•
Serial ATA (SATA) with RAID support
– Transfer rate up to 3Gb/sec
– Integrated AHCI controller
– RAID 0 and 1 supported through Intel Matrix Storage Technology
– Compatability mode supports legacy operating systems.
•
SATA Disk Chip Socket
– Miniature SATA Flash Disk Chip
– Capacities up to 8GB
1
– Natively supported by all major operating systems
•
Utility port
– PC/AT compatible keyboard port
– PS/2 Mouse Port
– Speaker port (0.1W output)
– Hardware Reset input
– Soft Power Button input
– Battery input for Real Time Clock
•
Power I/O
– ATX Power signals
BIOS
•
RTD Enhanced AMI BIOS
•
User-configurable using built-in Setup program
•
Nonvolatile storage of CMOS settings without battery
•
Boot Devices
1. During the time of this manual’s publication, 8GB was the largest available SATA Disk Chip capacity