rtd CMi37786HX, User Manual

Page: 76 / 120

CMi37786HX RTD Embedded Technologies, Inc.
68
1
If a floppy or IDE controller is not connected to the system, the I/O addresses listed will not be
occupied.
2
Only one of the I/O addresses shown for a Serial port is active at any time. You can use Setup to
select which one is active or to disable it entirely.
3
Only one of the I/O addresses shown for the Parallel printer port is active at any time. You can use
Setup to select which one is active or to disable it entirely.
4
If a PS2 mouse is not connected to the system, the I/O addresses listed will not be occupied.
3F0H-3F7H 8
Floppy disk
1
3F8H-3FFH 8
Serial port
2
(Select in BIOS) 4 aDIO (Advanced Digital I/O)
Table 36: I/O Addresses Reserved for the cpuModule (Continued)