Page 8 of 26
XK-CM30
Quad Serial Port Cable Kit
(To connect all 8 ports, purchase two XK-CM30s)
IDAN-CM17320HRS
CM17320HR mounted in an IDAN frame
May also specify a custom oscillator frequency.
IDAN-CM17320HRS/xxx.xxxMHz
IDAN-CM17320HRS with pre-installed oscillator
for custom baud rates
(xxx.xxx specifies the
frequency)
IDAN-XKCM33
IDAN Multi Serial Port Cable (4 ports)
(To connect all 8 ports, purchase two IDAN-XKCM33s)
In addition to the above ordering options, RTD can also provide the CM17320HR with various
customizations (e.g. conformal coating, custom connectors, soldered jumpers, etc). Contact
RTD’s sales department (
) for more information.
Getting Technical Support
If you are having problems with your system, please try the following troubleshooting steps:
•
Simplify the System
– Remove modules one at a time from your system to see if there
is a specific module that is causing a problem.
•
Swap Components
– Try replacing parts in the system one-at-a-time with similar parts
to determine if a part is faulty or if a type of part is configured incorrectly.
If problems persist, or you have questions about configuring this product, obtain the PCI BIOS
listing information of the CM17320HR and other modules in the system. After you have this
information, contact RTD Embedded Technologies via the following methods:
Phone: +1-814-234-8087
E-Mail: [email protected]
Be sure to check the RTD web site (
http://www.rtd.com
) frequently for product updates, including
newer versions of the board manual and application software.