13
2.4 The Rear Ports
1
Power
Connect the supplied power adapter to this jack.
2
Reset
After the router is powered on, press this reset button using the
end of paper clip or other small pointed object to reset the router
and
to restore it to factory default settings.
1. Recovery procedures for non-working routers (e.g. after a
failed firmware upgrade flash).
2. Recovery procedures for a lost web interface password:
3
WPS
Push WPS button to trigger Wi-Fi Protected Setup function.
4
Ethernet
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Note: Only Ethernet port 1 can be used for EWAN.
5
DSL
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
6
Antenna
Connect the detachable antenna to this port.
Port
Description
1
2
4
6
6
5
6
3
Summary of Contents for BEC 7300N
