P.12
RTA-7002
P.12
Assemble the “
L
” shape sliders
24
to the bottom of the drawers using
screws
J
. Please note the orientation of the sliders: the rollers go
towards the back, and the sliders should not protrude on the bottom,
otherwise the drawers raise 3/4” and won’t fit in the unit.
STEP 16
Hardware:
J
ST-3x14
8
Pcs
(NOT INCLUDED)
Scan QR Code to
View this step
Insert the Grommet
23
into the hole of the tabletop
1
, then insert the
drawers into the cabinet, the bottom drawer first, then the top drawer.
The drawers might need to be inserted at an angle with their fronts
facing down.
STEP 17
The wheel goes
towards the back
CORRECT INCORRECT
ATTENTION: VERY IMPORTANT!
