RTA-3520
P.7
ASSEMBLY STEPS:
SCREWS
A
12PCS
3X15 MM
SCREWS
5PCS
6X40 MM
B
1
2
Grab all the flat shaped Drawer Sliders (22) and set aside the “L” shaped ones. With the
Left & Middle Panels (1&2) oriented as illustrated, assemble the flat sliders (22) to the
holes on their inside faces. The wheels will be located at the front and facing down.
Join the Front Base Panel (8) to the Bottom Panel (6) by inserting the wood pins of (8) into the
holes of (6) as shown.
Screw the Bolts (B) to the corresponding holes on the inside face of Left Panel (1), then assemble
to it the Horizontal Panel (5), Bottom Panel (6) and Small Front Panel (8) by turning all the
corresponding cam locks.
3
Slide in the Back Panel (7) thru the channels in between
the Horizontal Panel (5) and Bottom Panel (6) as shown.
Make sure the panel fits inside all the channels.
Complete video assembly demonstration is available at:
www.rtaproducts.com/assembly-videos.htm
Detailed instructions on PAGE 5
TOP OF PANEL
1
2
22
22
Right
Left
3PCS
3PCS
6
8
1
5
6
8
7
5
6
