P.7
RTA-2018
P.7
STEP 9
Assemble the support tubes
⑩
A to the main panel
⑤
in the position of your preference
making sure that the
protection clips
⑩
B
are positioned in between, then use the screw
knobs
⑩
C to
secure the tubes as shown.
ON THE LEFT:
ON THE RIGHT:
ALL
DONE! Before you start using the unit, make sure that all the screws, bolts, cam
locks, etc. are properly tightened, and read all the warnings in the next page.
(This view is from the back side)
ON THE BACK
:
The clips
⑩
B go in between the tubes and
the main panel.
