Operation Mode Selection
Upon startup, you will be directed to the Operation Mode Selection page. There are 3 modes of
operation to select from:
•
Modbus TCP/IP Client to Modbus RTU/ASCII Slave(s)
– Use this mode to connect up to
5 Modbus TCP/IP Client devices with up to 255 Modbus RTU/ASCII Slaves.
•
Modbus TCP/IP Server(s) to Modbus RTU/ASCII Master
– Use this mode to connect up
to 255 Modbus TCP/IP Server devices with a Modbus RTU/ASCII Master.
•
Modbus TCP/IP Client to Modbus RTU/ASCII Master
– Use this mode to connect up to 5
Modbus TCP/IP Client devices with a Modbus RTU/ASCII Master.
1)
Under the mode you would like to configure, select if the Modbus slave or master
device is RTU or ASCII from the dropdown.
2)
Press the
Select
button to continue with the set up.
Real Time Automation, Inc.
9
1-800-249-1612
