Mapping – Auto-Map Mode to Manual-Map Mode
To transition from Auto-Map mode to Manual-Map mode, click the
Edit Mapping
button. After you click
this button, you will be prompted to confirm if this is really what you want to do.
Click
OK
to proceed to Manual Map mode or click
Cancel
to remain in Auto-Map mode.
There are 2 options on how to proceed from here.
1)
To keep the mappings that are already configured press
OK
.
a.
You would want this option if you are adding additional mappings or you want to modify
the mapping(s) that already exist.
2)
To delete the mappings that are already there and start over press
Cancel
.
To modify the number of mappings, enter a number next to
# of Mappings to Configure
and click the
Set Max # of Mappings
button. You can always add more mappings if needed.
Real Time Automation, Inc.
35
1-800-249-1612
