Real Time Automation, Inc.
68
1-800-249-1612
LED Configuration
To modify the behavior of the LEDs on the 460 gateway, navigate to
Other->Setup LEDs
.
Each LED may be set to Disabled, Protocol 1, or Protocol 2. If either protocol is a master/client, you may
set the LED to represent either all slaves/servers configured in the gateway or a slave/server device.
To select a slave/server device:
1)
Select the protocol in the left dropdown menu.
2)
Click
Save Parameters
to generate the second dropdown menu.
3)
Select the individual slave/server in the right dropdown menu.
Click the
Save Parameters
button to commit the changes and reboot the gateway.