Real Time Automation, Inc.
61
1-800-249-1612
Diagnostics
– Modbus RTU Slave
Select the
Modbus RTU Slave
in the dropdown menu on the Diagnostics Page. Additional diagnostic
information can be found by clicking the
Help
button.
NOTE
: This page will auto-refresh every five seconds with the latest data.
Clear All Values
- This will only affect displayed values
.
1)
This will reset all displayed values back to zero.
2)
If viewing Modbus RTU Slave, this will only clear the values for the Modbus RTU Slave section of the
gateway.
Device Status
1)
Connected - A Modbus RTU master has a connection for the gateway.
2)
Not Connected:
a)
The Modbus RTU master has not initiated communication to the gateway.
b)
The Modbus RTU master has not communicated to the gateway in “x” milliseconds, where “x” is
the inactivity timeout specified in the Modbus RTU Slave Configuration.
3)
Fatal Error: Hardware Port Not Configured:
a)
Hardware Port not configured on the Port Configuration Page.
b)
Hardware Port selected in the Modbus RTU Slave config
uration page doesn’t match the port
configured.
