Real Time Automation, Inc.
24
1-800-249-1612
Configuring Read and Write Scan Lines (cont.)
If you are configuring multiple devices, click
<<
or
>>
to navigate to another device. If this is the only
device you are configuring, click the
Save Parameters
button.
Below is the Scan Line Data Limit for each Point Type and the max length range associated to them.
Important Note:
When trying to read or write values via S7 communications, you MUST enable the
permit access PUT/GET option in your PLC under the Protection and Security with TIA Portal.
Important Note:
When trying to read or write values via S7 communications, you MUST disable the
Optimized block access in Attribute’s under the DB# properties setting.
