RTA 460BSUS-NNA1 Page 25 Product User Manual Download

Page: 25 / 76

Real Time Automation, Inc.

1-800-249-1612

BACnet/IP Server Object Configuration

– Group Names

Click the

Set Up BACnet Names, Units, and COV

button at the bottom of the BACnet/IP Server

Configuration page.

When in Auto-Configure Mode, these fields are not configurable.

The

Group Name

is designed to be used when there are multiple BACnet/IP objects that have the same

name. This is useful when you have multiple, identical devices connected on the other protocol.

Follow these steps to configure the Group Names in Manual Configure Mode:

Select

Group Name

from the upper left dropdown menu.

For each

Group Name

used in the previous setup, change the name to your desired text. Any

names not used do not need to be changed or configured.

Summary of Contents for 460BSUS-NNA1













































































Search results

Summary of Contents for 460BSUS-NNA1

Reviews:

Related manuals for 460BSUS-NNA1

Brands by name

Popular brands

RTA 460BSUS-NNA1, Product User Manual

Search results

Summary of Contents for 460BSUS-NNA1

Reviews:

Related manuals for 460BSUS-NNA1

Brands by name

Popular brands