RTA 010.117-0, Installation Information, Page: 36 / 48

Installationshinweis / Installation Information
010.117-0_ EAN-0027
RTA™ ist ein eingetragenes Warenzeichen von
PMA Mobile Electronics GmbH, A-6372 Oberndorf/Tirol, Römerweg 50, Österreich
Tel: +43 5352 67778, Fax: +43 5352 67778 3
Schutzvermerk nach DIN 34 beachten © PMA MOBILE ELECTRONICS - Weitere Hinweise zu DIN 34 - details to DIN 34:
http://www.pma-mobile.com
4. Operation
4.1. Activation of the video ‐ in ‐ motion function
The video ‐ in ‐ motion function is activated permanently without disturbing the navigation performance.
4.2. Selecting the DVB ‐ T interface as current AV ‐ source
Push the MEDIA button of the head ‐ unit and then
select VIDEO to choose the DVB ‐ T interface as current AV ‐ source.
4.3. Switching between internal DVB ‐ T and AV ‐ input
After selecting the dvbLOGiC as current AV source, tap
on the touch ‐ screen to receive the options menu. Select Senderliste
(channel list) to open the remote function menu. Select Switch
AV1/AV2 to switch, between internal DVB ‐ T (AV1) and AV ‐ IN (AV2).
Note: If the AV ‐ input is deactivated (see chapter 1.4.2.), it is not
possible to switch to the AV ‐ input AV ‐ IN (AV2).
4.4. Assigning device control for connected AV ‐ source
After selecting the dvbLOGiC as current AV source, tap
on the touch ‐ screen to receive the options menu.
Select Extras and then V ‐ text .
Select Seite (page).
Enter “2”, followed by the device ‐ related IR ‐ code as
described in device control table (appendix A).
Confirm with OK .
Note: If the AV ‐ input is deactivated (see chapter 1.4.2.),
it is not necessary, nor possible to assign device controls.