VW2106 Vibrating Wire Readout Manual
RST Instruments Ltd.
Page 17
F
IGURE
4-7
L
OGGING SCREEN
During the logging process, the logging number and the corresponding time stamp
will increase in the upper right-hand corner of the screen.
A message will appear indicating the logging process has been completed. The
readout will automatically turn off.
4.6
Z
EROING
R
EADOUT
The readout can be zeroed once the calibration factors are set for a specific location
and the correct sensor engineering units are selected and uploaded from the RST
Readout Host Software to the VW2106 unit. Please refer to the RST Readout Host
Software Instruction Manual (ELM0084) to set up sensor engineering units.
The following instructions detail the procedure for zeroing the sensor:
1.
Using the up/down arrows, scroll to the
Memory
screen and press
Enter
.
2.
Scroll to the
Zero Readout
screen and press
Enter
.
3.
Scroll to the desired location and press
Enter
.
4.
Select
Zero Readout
and press
Enter
.
5.
Press
Enter
to accept the value displayed or press
ESC
for more options (Figure
F
IGURE
4-8
Z
EROING OPTIONS
6.
Using the up/down arrows, scroll to the desired option and press
Enter
.
