RST meteoscan 938PRO, Operation Manual, Page: 4 / 56

page 4
RST01937 meteostanciya
2. Introduction
Thank you for your purchase this professional weather station. This device can receive signals up
to at most 8 sensors. All the sensors measure temperature, humidity, heat index and dew point
and transmit to the console and displayed in defined channels.
This manual will guide you step-by-step through setting up your device. Use this manual to be-
come familiar with your professional weather station, and save it for future reference.
3. Getting Started
Note: The power up sequence is performed in the order shown in this section(insert batteries in
the display console first, remote transmitters second). 3.1 Display Console Set Up Connect the
console to AC power with the included AC adapter.
3.1 Display Console Set Up
Connect the console to AC power with the included AC adapter.
If the remotes do not update, please reference the troubleshooting guide in Section 0.
3.2 Thermo-Hygrometer Sensor Set Up
Note: To avoid operating problems, please take note of battery polarity before/when inserting
any Alkaline Batteries (permanent damaged could be introduced by inserting the battery in
wrong direction). Do not use rechargeable batteries. We recommend fresh alkaline batteries for
outdoor temperature range between -20
℃
and 60
℃
and fresh lithium batteries for outdoor tem-
perature range between -40
℃
and 60
℃
.
1. Move the transmitters(s) about 5 to 10’ away from the display console (if the transmitters are
too close, they may not be received by the display console). With multiple transmitters, make
sure all transmitters are powered up and displaying different channels on the display.
2. Remove the battery door on the back of the thermo-hygrometer sensor by sliding down the
battery door, as shown in Figure 4.
Figure 4.
RST01938Manual 20.10.2017 13:20 Страница 4