RST meteolight Q774, Manual, Page: 6 / 43

метеостанция RST88774 weather station RST88774
Installation Installation
• Open the battery compartment located on the rear side of the devices. Place the batteries in the battery com-
partment. Observe the shown polarity. The batteries are backup batteries.
• Insert 2xAAA, LR03,1.5V batteries into outdoor sensor and observe the red LED light flashing.
• The station is now connecting to the outdoor sensor. This process takes about 3 minutes. Then the display shows
the outdoor temperature and humidity, in case of failure of reception , pls press“SEARCH“for more than 3 seconds
to receive again.
• the automatic receiving of the DCF radio signal begins after 3 minutes of outdoor reception.
• This RCC reception process is going on,the flashing symbol “ ”appears in the time display area at the same time.
• Once radio signal receiving is successful, the display shows the symbol “ ” continuously no flashing.
• 5.0V AC adaptor is included.
LCD LCD and and body body overview overview
RST88774-Manual-2020 06.05.2020 11:19 Страница 6