radio controlled receiving mode
After entering RCC receiving mode, "rcc" character will be in blink in the
LCD. If it had detected the available signal, with the blink of
in the
front of "rcc", and "rcc" stop blinking at the same time. After receive suc-
cessfully, " rcc" and
will display in the LCD all the times. If the setting
time zone won't be zero, it will display local time according to the setting
time zone automatically.
The weather station will begin to receive RCC automatically at 1:00, 2:00,
3:00, 4:00 each morning, each time will last for at best 10 minutes.
moon phase and tide
There are eight pattern for moon phase, see the following pattern. When
we use dynamic demonstrative method, it will change to be another
moon phase each second in the normal condition. The current moon
phase will last for 5 seconds when it is in the demonstration.
There are three indicators for tide: low, medium, high.
A: Full Moon
B: Waxing Gibbous
C: Last Quarter
D: Waxing Crescent
E: New Moon
F: Waning Crescent
G: First Quarter
H: Waxing Gibbous
snooze alarm time function
•
Hold "S ALARM" button for 3 seconds to enter Single Alarm Time set-
ting. Press "+"or"-"buttons to adjust the alarm time.
•
Press "S ALARM "button to switch alarm on or off.
•
Hold "W ALARM" button for 3 seconds to enter Weekday(except
Saturday and Sunday) Alarm Time setting. Press "+" or "-" buttons to
adjust the alarm time.
•
Press "W ALARM "button to switch Weekday Alarm on or off.
•
The snooze time by 8 minutes ,then it alarms again
•
Press and hold the "snooze/alarm stop" button for 3 seconds to stop
the alarm or snooze alarm.
When alarm switch off (no W alarm and no S alarm) on alarm display must
be show "OFF" instead alarm time. When we set alarm (W alarm or S
alarm) on display we can show alarm time and symbol with description
(W or S). When W alarm and S alarm turn on simultaneously, it display the
setting early alarm time for alarm time.
23
manual32705-707-2011:32705-707Manual-2011 25.08.2011 12:37 Page 23
