RST IQ785, Instructions Manual

Page: 36 / 40

outdoor thermo sensor unit registration procedure:
•The weather station automatically starts receiving transmission from remote Sensor for outdoor
temperature and humidity after new batteries are inserted.
•The sensor will automatically transmit temperature and humidity data to the weather station after
batteries inserted. Batteries compartment of remote sensor is locating behind the body back.
•For having more than one external transmitter (Maximum 5) select the Channel, Must be ensure
each sensor is transmitting difference channel after inserting batteries .The channel select button
(CH) is at the back of the remote sensor.
•Press “
o
C/
o
F” button to select Temperature in Celsius mode/Fahrenheit mode.
memory button function:
•Press “memory” button to show the maximum temperature and humidity.
“MAX” is shown on the LCD
•Press “memory” button again to show the minimum temperature and humidity.
“MIN” is shown on the LCD.
•Press and hold “memory” button for 3 seconds to clear the recorded maximum and minimum read-
ing.
temperature and air pressure trend display
After you insert batteries the weather station measures the current temperature, humidity and air
pressure. The trend is not shown on the LCD. When it shows
, it indicates that the temperature,
humidity or air pressure have the trend of increasing. When it shows , it indicates that the temper-
ature, humidity or air pressure have the trend of decreasing. If without showing these two indicators,
it means that the data is in stable during the current time.
36