RST IQ715, Instruction Manual, Page: 27 / 32

When turn on or reset the clock, LCD full display for 3 seconds, meanwhile, backlight illumi-
nating for 3 seconds. After BI, enter standard mode. Enter automatic RCC reception after
testing temperature and receiving RF for 3 minutes. And then exit after 10 minute or suc-
cessful reception.
•
The default time of continuous calendar is 1st Jan. 2010. 0:00
• The default alarm time is 7:00
• The temperature format is
• Time format is 24HR
RF start time
• 3 minutes automatic reception when inset the battery or reset.
• Hold “search” for starting 3 minutes RF reception.
• RF reception for 3 seconds at synchronous time.
Reception procedure
In the standard mode, hold “Search” for more than 2 seconds to delete data and start RF
reception for 3 minutes.
During the reception, the reception icon will display.
Synchronous period: 57 second, start RF reception 1.5second before the next synchronous
time, if it’s successful, exit immediately, if it’s failed, exit after 3 seconds and start reception
again at the next synchronous time.
RST 02715 27
Default Value
RF Reception
02715-Manual:02715-Manual 28.10.2010 12:36 Page 27