When alarm is switch off (no W alarm and no S alarm) on alarm display must be show
"OFF". instead alarm time. When we set alarm (W alarm or S alarm) on display we can
show alarm time and symbol with description (W or S). When we switch on W alarm and
S alarm at the same time, the alarm time, which display in the screen is S alarm time.
Thermometer:
•
Press oC/oF button to select Temperature in Celsius mode/Fahrenheit mode.
Lighting:
•
Briefly press the "SNOOZE/LIGHT" button to activate the display lighting for 5 seconds.
Maximum/Minimum temperature recording function:
•
Press "Memory" button to show the maximum indoor and outdoor temperature.
"MAX" is shown on the LCD.
•
Press "Max/Min" button again to show the minimum indoor ,outdoor temperature.
"MIN" is shown on the LCD.
•
Hold "Max/Min "button for 3 seconds to clear the recorded maximum and minimum
reading.
Temperature trend display
•
After you insert batteries the weather station measures the current temperature. The
trend is not shown on the LCD. The further course of the trend display is determine as
follows:
•
If after an hour the temperature is more than 1oC higher then the negative course is dis-
played(arrow pointing upwards).
•
If after an hour the temperature is more than 1oC lower than the value measured before
then the negative course is displayed (arrow pointing upwards).
•
If the temperature dose not change within an hour, .then the upward or downward point-
ing arrow becomes no display. The measured temperature is the taken as the neutral
value from which further prognoses are made.
After you insert the battery
Outdoor thermo sensor unit registration procedure:
•
The weather station automatically starts receiving transmission from Outdoor
Thermo Sensor for outdoor temperature after new batteries are inserted.
•
The sensor will automatically transmit temperature to the weather station
after batteries inserted. Batteries compartment of thermo sensor is locating behind the
back cover, unscrews to open.
•
For having more than one external transmitter (Maximum 3), select the Channel, CH1,
CH2 or CH3 to ensure each sensor is transmitting difference channel inserting batteries.
The channel select switch is at the back of the thermo sensor.
•
Press "TX" button on the thermo sensor unit transmit temperature to the weather station
manually. The weather station gives a "beep" sound if it received the temperature.
•
Press oC/oF button to select Temperature in Celsius mode/Fahrenheit mode.
Display outdoor temperature:
•
Press "CHANNEL" button to view 3 Channel' s temperature .The sequence is shown as
follow:
•
Press "CHANNEL" button Display the three channels alternatively
•
Hold "CHANNEL" button for 3 seconds to cancel unused channel manually .It will auto-
matically register a new channel again if a new channel is transmitted.
•
Three round arcs which is below the channel digitals' right side, it indicates the intension
Manual02711.qxp 11.01.2008 14:20 Page 13
