MEMS Tilt Beam Instruction Manual
RST Instruments
1
1 GENERAL DESCRIPTION
RST Instruments MEMS Sensor Tilt Beam is mounted on vertical or horizontal
surfaces and can measure differential angles in the X or Y directions. The Horizontal
or Vertical MEMS Tilt Beam system consists of a fiberglass beam with mounting
brackets, and a uniaxial MEMS sensor. The Vertical Tilt Beam is capable of uniaxial
as well as biaxial MEMS sensors (optional). Because of the excellent zero and range
stability, no separate sensor leveling is required- i.e. the enclosure should be mounted
as close to level as possible, but no secondary level adjustment is required.
Figure 1: MEMS Tilt Beam
COVER PLATE
SCREWS
MEMS TILT BEAM
SERIAL # LABEL
PIVOT REFERENCE
LEFT MOST ANCHOR
CABLE INPUT
(JACKET STRIPPED 15cm)
ADJUSTABLE
END BRACKET
ADJUSTABLE
END BRACKET
CABLE OUTPUT
(BUSSED SYSTEM ONLY)
(JACKET STRIPPED 25cm)
FACE PLATE
FIBERGLASS
BEAM
Figure 2: MEMS Tilt Beam Details