MEMS Digital in-Place Inclinometer System
Quick Start Up Guide
ICM0095B
RST Instruments Ltd.
5
4
DT2485
Q
UICK
S
TART
U
P
I
NSTRUCTIONS USING
DT
L
OGGER
H
OST
The following is a brief outline to get you up and running quickly with the RST
DT2485 data logger and DT Logger Host.
4.1
D
IGITAL
O
UTPUT FOR
MEMS
IPI
S
YSTEMS
To connect the IPI system to the DT2485, wire the cable to the screw terminal
according to Table 4-1.
.
T
ABLE
4-1
D
IGITAL OUTPUT FOR
MEMS
IPI
4
SYSTEM AND
RST
DT2485
Wire Color
MEMS IPI 4
Red
V+
Green
A
White
B
Black
GND
Bare
SH
4.2
S
OFTWARE
I
NSTALLATION
1. Run the software installation file RST_
DTLogger_Setup_X.XX.X.exe,
where X.XX.X indicates current software version. The current version can be
downloaded from:
https://rstinstruments.com/resources/software
. Navigate to the site and
select the appropriate data logger.
2. Follow the on-screen instructions to install the software. The default directory
is:
C:\Program Files (x86)\RST Instruments\DT Logger Host\
Contact RST Instruments with any questions or concerns.
4.3
D
ATA
L
OGGER
C
ONFIGURATION
1. Connect the IPI string to the logger by following the wiring scheme outlined in
Table 4-1. Connect the logger to a PC via the USB port or via the wireless
module, if applicable.
NOTE:
T
HE
DT
L
OGGER
H
OST SOFTWARE REQUIRES A SET OF DRIVERS INSTALLED ON
THE HOST COMPUTER IN ORDER TO COMMUNICATE OVER
USB
COMMUNICATION
PORT
.
I
F AUTOMATIC DRIVER UPDATE IS ENABLED AND AN INTERNET CONNECTION IS
AVAILABLE
,
RST
USB
DRIVERS WILL BE DOWNLOADED FROM
M
ICROSOFT
™
W
INDOWS
U
PDATE SERVER AND INSTALLED AUTOMATICALLY
.
