MEMS Digital Inclinometer System with Android
Instruction Manual
ICM0099A
22
graphing feature allow the user to analyze results at the borehole and take appropriate
actions based on the collected results.
To utilize the comparison graphing feature, the user must first configure the desired data set
to review. The user must select the Base reading and the Comparison reading data sets.
Step 1 - Select the base reading
Tap the configuration icon
to select the graph setting. Then tap the “Base reading” region to
list the possible base readings to choose. Select the desired base reading date as the base
or reference reading. This is shown in Figure 17.
Figure 17
– Select the base reading
Step 2 - Select the comparison reading(s)
Tap the configuration icon to select the graph setting. Then tap the “Show graphs for” region
to select or de-select the comparison readings. A listing of the historical readings are
displayed in chronological order. Select or de-select the desired readings to compare against
the base reading. This is shown in Figure 18.
Figure 18
– Select the comparison reading(s)
